This post may contain affiliate links.
See our disclosure policy for more details.
For many of us, Christmas is the day that brings us together.
For me, it’s also a time when I make Christmas-themed gifts.
And I love it when people share their Christmas decorations on my blog.
I love that so many people can share their holiday decorations, and I think that’s really great.
So, I wanted to make a DIY Christmas fireplace.
And what better way to start than by making a Christmas decorating box?
Christmas Decorating Box TutorialThe easiest way to make your own Christmas decorator is by taking a Christmas card template and making your own DIY Christmas decor box.
If you don’t have one, you can use the template as a template.
I’m making this one to use in my Christmas decorate.
Here are a few tips to help you make it as easy as possible.1.
Get a box of cards and cut out the top of each one, leaving a small opening for your cards to rest in.2.
Make sure you get the right size cardstock.
You’ll want to make sure you have a cardstock that will fit inside the box.
It should be enough to fit the card, but don’t overdo it.
You may want to add a few inches of cardstock on top.3.
The bottom of the box should be cut out so that it’s completely square.
I usually use a 3-inch square.4.
The cardstock will be cut in half and then folded over to make the top.
The shape of the top is up to you.5.
You should then have a box that is about 1/2 the width of the cardstock you cut out.
I typically make a large box that’s about 1-inch wide, but you can make one smaller if you like.6.
You can then glue the cards together.
I used paper glue, but I’d recommend you use something like polyurethane.
If possible, you’ll want some glue to hold them together.7.
The back of the cardboard box should have a hole.8.
You will need a small amount of glue.
You want to apply the glue around the inside of the hole, so the glue is sticky.
If the glue dries too quickly, you may need to add more glue.9.
You need a little bit of foam.
I recommend using a small foam roller to apply a little of the glue.
It will help hold the cards in place.
If using glue, it will also make it easier to remove the card when it’s ready to be cut.10.
Now that you have glue, you need to apply it to the inside corners of the holes you made in the card template.
This will give the decorator the chance to slide the card into the hole before it is glued.
The glue will not stick to the cardboard inside of these holes.11.
The inside of your box should now be filled with cardstock, as shown in the video below.
Make the sides of the sides as wide as they can go, but leave the top wide enough so the card can fit inside.12.
When you’re done, you should have an interior box that has the same width as the top and the same depth as the bottom.
I like to cut a piece of card stock into a small rectangle and glue the top edge of that rectangle to the top or bottom of my cardboard box.
This way, the cardboard boxes will stay together when I’m ready to decorate it.13.
You now have a Christmas decoration box. Enjoy!